Foxconn 520A User Manual page 27

Chapter 2 BIOS Description
Date/Time
1.1
This item allows you to set up the desired time and date(usually as the
current time and date) with <day><month><date><year>/<hour><minute>
<second> format.
Day—weekday from Sun. to Sat.
Month—month from 1 to 12
Date—date from 1
Year—year, set up by users.
Use <ENTER>,<TAB> to select a field. Use <+>or <-> to configure system
time and date.
1.2 IDE Channel 0 Master/Slave and SATA Channel 1/2/3/4 Master
These categories identify the HDD types of 1 IDE channel installed in the com-
puter system. There are three choices provided for the Enhanced IDE BIOS:
None, Auto, and Manual. "None" means no HDD is installed or set; "Auto" means
the system can auto-detect the hard disk when booting up; by choosing "Manual"
and changing Access Mode to "CHS", the related information should be entered
manually. Enter the information directly from the keyboard and press < Enter>:
Cylinder number of cylinders
Precomp write pre-compensation
Sector number of sectors
Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
Note: Set to [Auto] , the system can detect the hard disk and select the
HDD mode automatically when booting up. Suggest you select this option.
1.3 Drive A
This option allows you to select the kind of FDD to be installed, including
[None],[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and
[2.88 M, 3.5 in].
1.4
Halt On
This category determines whether or not the computer will stop if an error
is detected during powering up.
22
st to 31 st
Head
Landing Zone
number of heads
landing zone