Pantech Hotshot User Manual page 40

ABOUT
1. Unlock the screen, tap Settings
2. Tap Voice Commands Settings
3. View the version information about Nuance.
LANGUAGE
To set the language of the display:
1. Unlock the screen, tap Settings
2. Tap Language.
3. Tap a language in the Change to
LOCATION
The Location (GPS) service allows the network to detect and find your current location.
1. Unlock the screen, tap Settings
2. Tap Location.
3. Tap Full Detection to allow the network to detect your location.
To detect your location only in E911 mode, tap
When Lock Setting is set for Location Setting
you will need to enter a lock code. The default lock code is the last 4 digits of your
phone number.
CURRENT COUNTRY
Allows you to set the country of your current location so that your phone works properly
while you travel.
1. Unlock the screen, tap Settings
2. Tap Current Country.
3. Tap a country in the Change to
76
and then tap Phone Settings.
and then tap About.
and then tap Phone Settings.
field to select.
and then tap Phone Settings.
E911 Only.
under Restrictions on the Security
and then tap Phone Settings.
field to select.
SECURITY
The Security menu allows you to electronically secure the phone. To access this menu,
you must enter the 4-digit lock code. The default lock code is the last 4 digits of your
phone number.
EDIT CODES
To change the lock code:
1. Unlock the screen, tap
2. Tap Security.
3. Enter the 4-digit lock code.
4. Tap Edit
5. Tap one of the following settings:
• Phone Only: Allows you to edit the lock code for Security.
• Calls & Services: Allows you to edit the lock code for Restrictions.
6. If you selected
4-digit lock code again to confirm your input.
If you selected
Enter the new 4-digit lock code twice to confirm your input.
menu,
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls, Messages and
Dial-Up Modem restrictions.
1. Unlock the screen, tap
2. Tap Security.
3. Enter the 4-digit lock code.
4. Tap Restrictions
5. Tap one of the following settings to select:
• Location
• Calls: Incoming Calls/Outgoing
For Incoming Calls, set
For Outgoing Calls, set
Settings and then tap
Codes.
Phone Only, enter the new 4-digit lock code. Enter the new
Calls & Services, enter the 4-digit Calls & Service lock code.
Settings and then tap
and then enter the 4-digit lock code.
Setting: Unlock Setting/Lock Setting.
Calls.
Allow All, Contacts Only, or Block
Allow All, Contacts Only, or Block
01
02
03
Phone Settings.
04
05
06
07
08
Phone Settings.
All.
All.
77