Phone Settings - Pantech Hotshot User Manual

PHONE SETTINGS

Allows you to customize the phone settings of your phone.
VOICE COMMANDS SETTINGS
Allows you to set options for Voice Commands.
CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat
your voice command. If it does not recognize the name or number, it will display a
list of up to three choices and speak each one in turn. You can control how often the
phone asks you to confirm the recognized name or number.
1. Unlock the screen, tap Settings
2. Tap Voice Commands Settings
To view information about each option, tap Info.
3. Tap a confirmation choice in the
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages
NOT RECOGNIZED Try again?", adjust the sensitivity toward
frequently experience false activations (when the phone recognizes a name you
didn't say), adjust the sensitivity toward
1. Unlock the screen, tap Settings
2. Tap Voice Commands Settings
3. Tap Automatic, More Sensitive, or
to select.
ADAPT VOICE
Voice Commands are speaker independent, which means that no training
or adaptation is required. Some users with heavy accents or unusual voice
characteristics may find difficulty in achieving high accuracy with speaker
74
and then tap Phone Settings.
and then tap Confirm Choices.
Change to field to select.
"Please try again" or "COMMAND
Less Sensitive. If you
More Sensitive.
and then tap Phone Settings.
and then tap Sensitivity.
Less Sensitive in the Change to
independent Voice Commands, so the Adapt Voice feature allows users to
dramatically improve the recognition accuracy after adapting their voices.
Users who get acceptable recognition accuracy will find no additional benefit to
performing the Adapt Voice feature.
1. Unlock the screen, tap
2. Tap Voice Commands Settings
3. Tap Train
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
• Reset Voice: Once you finish the adaptation process, you can reset the adaptation to
the factory default. The Reset Voice option only appears after you finish the Train Voice
process.
4. Tap OK
5. Wait for the beep, and then repeat the sentences using a normal tone of
voice.
6. When you are finished with a full session, you will reach a screen that reads
"Adaptation
PROMPTS
Allows you to select voice command system characteristics.
1. Unlock the screen, tap
2. Tap Voice Commands Settings
3. Tap one of the following options and then tap the desired submenu option
in the Change to
field • Mode: Tap the voice command system mode from the following:
- Prompts: For handset to prompt for required information.
- Tones
• Audio Playback: Allows audio playback to play through the speakerphone or earpiece.
Tap Speakerphone
• Timeout: Tap a period of time either
for a command before timing out.
Settings and then tap
and then tap Adapt
Voice.
to begin.
complete. "
Settings and then tap
and then tap Prompts.
field to select:
Only: For handset to provide beeps only for audio guidance.
or Earpiece.
5 seconds or 10 seconds
01
Phone Settings.
02
Voice.
03
04
05
06
07
08
Phone Settings.
which the system listens
75