Finishing Menu - Lexmark MS719 User Manual

Ms710 series
Table of Contents

Advertisement

Understanding printer menus
Use
Download Target
RAM
Flash
Disk
Resource Save
On
Off

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
To
Set the storage location for downloads.
Notes:
RAM is the factory default setting. Storing downloads in the
RAM is temporary.
Storing downloads in a flash memory or in a printer hard disk
places them in permanent storage. Downloads remain in the
flash memory or on the printer hard disk even when the
printer is turned off.
This menu item appears only when an optional flash memory
or a formatted, working printer hard disk is installed.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Notes:
Off is the factory default setting. This sets the printer to
retain downloads only until memory is needed. Downloads
are deleted in order to process print jobs.
On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38] appears on the printer display, but
downloads are not deleted.
To
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
"1 sided" is the factory default setting.
You can set two‑sided printing from the printer software.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and pop‑up
menus.
Define the way duplexed pages are bound and printed.
Notes:
Long Edge is the factory default setting. Long Edge assumes binding along the
long edge of the page (left edge for portrait and top edge for landscape).
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
121

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms711Ms710

Table of Contents