Understanding printer menus
Use
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text 1
Export Configuration File
Export
Flash Drive
Print Settings menu
Use
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Sides (Duplex)
1 sided
2 sided
To
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: "Do nothing" is the factory default setting.
Restore the printer settings to its factory defaults.
Notes:
•
Do Not Restore is the factory default setting. This keeps the
user‑defined settings.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads stored
in the flash memory or in the printer hard disk are not
affected.
Display information pertaining to the selected Custom Home
Messages on the printer control panel display.
Export the printer configuration file to a flash drive.
Note: The configuration file cannot be exported unless a flash
drive is attached to the printer.
To
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether prints are on one side or on both sides of the page.
Note: 1 sided is the factory default setting.
117