Nstallation; Desktop Installation - GE 29893 User Manual

I

NSTALLATION

D I
ESKTOP NSTALLATION
1. Plug the coiled cord into the jack on the handset and the jack on the side of the base.
2. Place the handset in the cradle.
3. Plug one end of the long straight telephone line cord into the LINE jack on the back of the
base, and plug the other end into a modular telephone (wall) jack.
4. Connect the power supply into the POWER 9V AC jack on the back of the base. Plug the
other end into an electrical (AC) outlet. The unit beeps once and is ready for setup or to
answer calls with the default greeting and settings.
NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse
(rotary) dialing, see "Setting the Dialing Mode." If you don't know which type of service
you have, check with the phone company.
CAUTION: Only use the ATLINKS USA 5-2434 power supply that came with this
unit. Using other power supplies may damage the unit.
6
3
4
1
2