GE 29893 User Manual page 31

Answering system doesn't work.
• Unplug the power cord from the electrical outlet and plug it back in to reset the
answering system.
After the unit is plugged in, FLASH ERROR is displayed
• Unplug the unit and plug it back in. If the message appears again, the unit needs service.
Can't hear messages.
• Adjust the volume control.
Greeting continues to play even after an extension phone is picked up.
• This is normal operation. Auto disconnect is delayed for 1 second after the unit answers a
call. If you are near the unit, press PLAY/STOP to stop the greeting.
No information is shown after the phone rings.
• Wait for the second ring to view CID records.
• Check all cabling to make sure that all connections are secure and not damaged.
• You must be subscribed to Caller ID service from your local telephone company to receive
Caller ID records.
Error message is displayed.
• ERROR appears in the display if the unit detects anything other than valid Caller ID
information during the silent period after the first ring. This message indicates either the
presence of noise on the line, or that an invalid message has been sent from the
telephone company?
31