Emo; Ccess Ommands - GE 29893 User Manual

R A
EMOTE CCESS
You can access your answering system from any touch-tone phone from another location by
entering your 3-digit security code (the default security code is 1 2 3, but you can change it.)
Be aware that remote functions do not work with rotary or push-button pulse-dialing
phones.
To access your answering system:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security code. The unit
confirms your code with a beep. To bypass the greeting, you can enter your 3-digit
security code any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security code has been
entered. Menu selections can be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it is turned off or the memory is full. To
access the answering system, enter the 3-digit security code after the beep. If memory is
full, play messages and erase some of them to restore memory.
NOTE: After the unit plays the remote menu, it waits 20 seconds for a command, then
disconnects.
R A
EMOTE CCESS
Play new message
Play all messages
Repeat messages (during message playback)
Play previous message (during message playback)
Skip to next message (during message playback)
Erase message (during message playback)
Stop playback (during message playback)
Turn answering system on/off
End call
20
C
OMMANDS
1
2
5
6
7
0
4
3
4