NurseCall Relay Unit
6.4
Cleaning
6.5
Parts replacement
6.5.1
Disassembling the unit
Removing the antenna
1.
Removing the communication board
DANGER!
Do not damage the battery cable, its connector (7) or the serial communication board
connectors.
1.
2.
3.
Bosch Security Systems
Avoid using cleaning products or detergents.
Wipe off your NurseCall Relay Unit occasionally with a dry cloth.
Remove the antenna (1) and its adapter (2) or (3).
1
2
With a Torx T20 screwdriver, unscrew and remove the 4 screws (4).
With a Torx T10 screwdriver, unscrew and remove the screw (5).
Carefully remove the communication board (6).
4
7
User Manual
Maintenance | en
1
3
6
5
F.01U.252.722 | V1 | 2011.12
29