14
en | Installation
3.2
Installation
3.2.1
Generalities
Tools required:
–
–
3.2.2
Installation on a piece of furniture
It is recommended to place the NurseCall Relay Unit on a non-slippery surface. However, do
not place anything (blanket or lace) on top of the unit.
3.2.3
Wall installation
You can fasten the NurseCall Relay Unit on a smooth wall surface using two screws. The
distance between holes is 157 mm.
The power line cord should be placed inside the cable channels on the bottom of the
NurseCall Relay Unit.
3.2.4
Installing the antenna
1.
2.
3.
F.01U.252.722 | V1 | 2011.12
Install the NurseCall Relay Unit in a dry place, away from any source of heat.
Torx T20 screwdriver.
Torx T10 screwdriver.
Use the straight adapter (4) for wall installation or the right angled bended adapter (3)
for installation on a piece of furniture.
2
3
Fasten the adapter (3) or (4) on the antenna connector (1).
Fasten the antenna (2) on the adapter.
User Manual
NurseCall Relay Unit
2
4
1
Bosch Security Systems