Care & Maintenance - Classe Audio SSP-800 Owner's Manual

Caution!
input factory defaults
Care & Maintenance
To remove dust from the cabinet of your Surround Sound Processor, use a
feather duster or a lint-free soft cloth. To remove dirt and fingerprints, we
recommend isopropyl alcohol and a soft cloth.
Dampen the cloth with alcohol first and then lightly clean the surface of the
Surround Sound Processor with the cloth. Do not use excessive amounts of
alcohol that might drip off the cloth and into the Surround Sound Processor.
Power down and remove the AC power cord from the
SSP before performing maintenance. At no time should
liquid cleaners be applied directly to the Surround Sound
Processor, as direct application of liquids may result in
damage to electronic components within the unit.
For your convenience, here are the factory default settings for the
SSP-800/CT-SSP Surround Sound Processor.
Input # Default Audio Connector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Coaxial Digital 1
Coaxial Digital 2
Coaxial Digital 3
Coaxial Digital 4
Optical Digital 1
Optical Digital 2
Optical Digital 3
Optical Digital 4
XLR Analog 1
RCA Analog 2
RCA Analog 3
Coaxial Digital 1
Coaxial Digital 2
Coaxial Digital 3
Optical Digital 1
Optical Digital 2
Optical Digital 3
XLR Analog 1
RCA Analog 2
RCA Analog 3
Default Video Connector
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
65