Classe Audio SSP-800 Owner's Manual page 25

4 Preset Config (Configuration) Button
This button steps through the configurations set to "in use". If there is
already a configuration active (due to being a default) for a particular input
it will be overridden until the input is selected again, or the user selects
that default configuration.
5 Volume Control & Mute Buttons
The Volume Up and Down arrow buttons increase or reduce the overall
volume level of the audio output. The Mute button controls the system
volume level. Pressing the Mute button reduces the audio output volume
level by a pre-determined amount. You can customize selected features of
both the Mute button and volume level. Refer to the Volume description in
the Menu System section found later in the manual for further instructions.
6 Navigation & Menu Buttons
The central section of the remote control contains the navigation buttons
and the menu access buttons. This array of buttons is used for navigating
the menu system on the SSP. Each of the buttons performs the following
function(s):
• Menu accesses the main screen for the menu system, in the same
fashion as the front panel Menu button.
• Home returns the touchscreen display to the Home page, which
presents the normal operation options – Source, Mode, Video
Preview, and Controls. The Home button essentially acts like a
"back to start" button – no matter how deeply you've navigated
into the menu system, a simple button push returns you to the
front page.
• Navigation Arrows are the Up (p), Down (q), Left (t),
and Right (u) arrow buttons, which allow you to select, by
highlighting, the different menu options with the menu system.
• Enter selects options. Pressing the Enter button selects the
highlighted menu item in any menu screen.
• Profile button accesses the Profile page(s). Profiles are customized
versions of the system's Home screen. You can name these profiles
and pre-program them so you have direct access to frequently
used controls. See the Profiles description in the Menu System
section found later in the manual for more details.
• Trim button accesses the System Trims menu screen, which allows
you to make temporary adjustments to speaker levels and the lip
sync feature. These temporary trims do not override the settings
you made through the Setup menu and are discarded when you
select a new source. See the Menu System section found later in
the manual for more details.
7 Function Keys (F1 to F4)
The last four buttons on the remote control are the Function buttons,
or FKeys, which provide additional flexibility to the SSP remote control.
Think of them as "favorite" buttons that provide direct access to a specific
function or command not covered by the other buttons. Refer to the
Remote Function Buttons description in the Menu System section found
later in the manual for more information.
25