Classe Audio SSP-800 Owner's Manual page 19

4 HDMI Outputs
The SSP supports two HDMI outputs, labeled 1 and 2. The
SSP HDMI outputs support HDMI v1.4a featuring 2D video at
resolutions up to 1080p @ 24/50/60 fps, standard 3D video formats with
resolutions up to 1080p @ 24 fps, Audio Return Channel (ARC), HDMI
Ethernet Channel (HEC), Deep Colour, x.v.Color(xvYCC) and provides a
2-channel SPDIF downmix of the source material.
Non-HDMI source material is encoded for an HDMI display at the
source's native video rate. By HDCP license agreement, HDMI input
signals can NOT be converted to analog format, and are only output via
HDMI at the incoming resolution.When an analog video input signal is
output via HDMI to the display, the video input is converted to digital
format and output at its native rate. The two HDMI outputs are NOT
independent.
NOTE: HDMI is an interactive format, which can occasionally
cause format errors between the source devices and the output
display. If you connect the SSP HDMI outputs to two different
displays, the HDMI source automatically provides a signal
compatible for both displays. In some cases, this response can result
in less-than-optimal resolutions for one or both displays.
5 Component Video Output
The SSP is equipped with component video output via 3 RCA connectors
labeled Pr, Pb, and Y. Use this connection to connect to non-HDMI
displays. The component output does not support output of 1080p signals.
NOTE: Due to HDCP licensing restrictions the component video
output will not work with most source material input via HDMI.
6 Digital Audio Inputs - Coaxial
The SSP supports four digital audio inputs, with SPDIF connectors labeled
COAX1 to COAX4. These inputs accept PCM data streams up to
24-bits long and up to 192kHz sampling frequency. We recommend using
cables that are optimized for digital audio signal transfer and that carry a
75Ω impedance rating. Your Classé dealer can help you with proper cable
selections.
7 Digital Audio Inputs - Optical
The SSP supports four digital audio inputs, with optical TOSlink
connectors labeled OPT1 to OPT4. These inputs accept PCM data
streams up to 24-bits long and up to 192kHz sampling frequency. We
recommend using cables that are optimized for digital audio signal transfer.
Your Classé dealer can help you with proper cable selections.
NOTE: The bandwidth limits of TOSlink™ components are very
much strained at a 192kHz sampling frequency. For that reason we
recommend keeping the TOSlink™ connections at a maximum rate
of 96kHz.
TM
19