Table of Contents
Advertisement
T7525/T7526 THERMOSTAT TOUCHPAD
Change the Program Setpoint Temperatures
Base Screen
o
Set:
C: 80
Warmer
o
Cooler
Actual:
80
Rate: NORMAL
Options
Next
12:25PM Mon
First Options Menu
Options
Hold Temperature
More
Second Options Menu
Options
Run Schedule
Climate Control
Present Time/Day
More
Climate Control Menu
Climate Control
Settings and Schedules
Heat/Cool Equipment
Ventilation
Settings and Schedules Menu
Settings and Schedules
Weekday
Temperature Settings
Day Schedule
Current Settings Screen
Sunday Settings
Wake H: 70˚ C: 78˚
Leave H: 62˚ C: 78˚
Return H: 70˚ C: 78˚
Sleep H: 64˚ C: 78˚
Current Period Settings Screen
(Change Cool Shown)
Weekday-Leave Settings
o
Heat:
62
Change Cool
69-0860—1
You can change the setpoint temperature. Follow these steps:
Step 1
1. From the Base screen, press the Options soft key. The screen displays the first
Select
Options menu.
2. Press the More soft key. The screen displays the second Options menu.
Back
3. Press the Climate Control soft key. The screen displays the Climate Control
menu.
M8625A
Step 2
4. Press the Settings and Schedules soft key. The screen displays the Settings
and Schedules menu.
Select
5. Press the
Saturday, or Sunday) displays.
Back
6. Press the Temperature Settings soft key. The screen displays the current
settings for each period for the selected day.
M8626A
Step 3
NOTE: H refers to the heating setpoint; C refers to the cooling setpoint.
7. Press the soft key for the period to be changed. The screen displays the settings
Select
for that period.
Back
8. Press the Change Heat or Change Cool soft key until the desired setpoint type
(Heat or Cool) is displayed.
M8627A
9. Press the
Step 4
displays. The setpoint temperature range is 45° to 88°F (7° to 31°C).
10. Perform one of the following:
Select
a.
To accept the new setting, press the Select key or do not press a key for
Back
one minute. The screen displays the current settings for the selected day.
b.
To cancel the temperature entered in step 9, press the Back key within one
M8628A
minute. The screen displays the current settings for the selected day.
Step 5
NOTE: For systems using the T7525C/T7526C Thermostat Touchpads (auto
Select
Back
11. Repeat steps 7 through 10 for any other heating or cooling setpoints that need to
M8629A
be changed.
Steps 6 & 7
12. Press the Select key. The screen displays the Settings and Schedules menu.
Select
13. Repeat steps 4 through 11 for any other days that need to be changed.
14. Press the Select key repeatedly until the Base screen displays.
Back
M4472
Steps 8-10
Select
Back
M8630A
or
soft key repeatedly until the desired selection (Weekday,
or
soft key repeatedly until the desired temperature setting
changeover), a minimum 3 degree F (2 degree C) deadband is
maintained between the heating and cooling setpoints. If either setpoint
is adjusted into the deadband, the other setpoint will automatically
change to maintain the minimum 3 degree F differential.
6
USING THE TOUCHPAD
Advertisement
Table of Contents
