Kenwood KDC-U7056DAB Quick Start Manual page 15

2-Way/3-Way Crossover Setting
Select a crossover mode 2-way or 3-way
according to how the speakers are
connected.
1
Press the [SRC] to select "STANDBY".
2
Pressing down the [S] and [E]s for at
least 3 seconds, allows you to enter the
2-way/3-way crossover setting mode.
3
The currently selected crossover mode
is displayed.
To change it, turn [Control] knob to
select "YES", and then press [Control]
knob.
4
A confirmation screen appears.
If you are sure you want to change the
crossover mode, turn the [Control]
knob to select "YES", and then press the
[Control] knob.
5
The newly selected crossover mode is
displayed, canceling the 2-way/3-way
crossover setting mode.
English | 15