Bacnet Ip Parameter Descriptions; Ethernet Common Settings - Honeywell BacNet protocol Installation And User Manual

Honeywell • 23
5.4

BACnet IP parameter descriptions

5.4.1

Ethernet common settings

P5.8.1.1 IP
ADDRESS MODE
Selectable alternatives are
DHCP protocol gives IP addresses to new devices connecting to local network. This address
is valid for a certain period of time.
A fixed IP address is specified manually and it does not change.
When the mode is changed from DHCP to Fixed the addresses will read
: 192.168.0.10
IP
: 0.0.0.0
Subnet mask
: 0.0.0.0
Default gateway
P5.8.1.2 IP
ADDRESS
An is a series of numbers (like above) specific to the device connected to the Inter-
IP address
net.
P5.8.1.3 S
UBNET MASK
The network mask marks all the bits of an IP address for the identification of the network and
the subnetwork.
P5.8.1.4 D
EFAULT GATEWAY
Gateway address is the IP address of a network point that acts as an entrance to another net-
work.
P5.8.1.5 MAC
The MAC address of the control board.
MAC address (Media Access Control) is a unique address given to each network host.
(Dynamic Host Configuration Protocol) and
DHCP
ADDRESS
Programming
.
Fixed