Electro-Voice ZLX-12P Owner's Manual page 7

Tripod and Floor Monitor Operation (cont.)
Tripod
Electro-Voice ZLX series loudspeakers include 35 mm (1-3/8 in) stand mounts to allow mounting on tripod stands or above an
ELX118P. Make sure to:
• Check the specifications of the speaker stand to be certain it is capable of supporting the weight of the speaker.
• Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the legs of the stand.
Do not try to make the stand "taller" and compromise its structural integrity.
• Route cables and position the stand so that performers, production crew and audience members will not trip over the
stand or cables and pull the speaker system over. Secure cables with wire ties or tape whenever possible.
• Do not attempt to suspend more than one speaker on a stand designed for a single speaker.
• Unless you are confident that you can safely handle lifting the weight of the speaker onto the stand, ask another person
to help you place it.
Figure 2a:
ZLX on Tripod Stand
Electro-Voice ZLX Series Owner's Manual
Figure 2b:
ZLX Full-Range/Sub Stack with Pole Mount
7