D-Link DVG-N5402SP User Manual page 72

Voip wireless router
Hide thumbs Also See for DVG-N5402SP:
Table of Contents

Advertisement

DVG-N5402SP User's Manual
SIP Caller ID Obtaining: Select the part of the SIP packet from the VoIP Gateway to obtain Caller ID.
There are several places where the Caller ID is located.
Remote-Party-ID Display Name - It is located at SIP → Remote-Party-ID → Before [<sip:]
Remote-Party-ID User Name - It is located at SIP → Remote-Party-ID → After [<sip:], Before [@]
From-Header Display Name - The standard way is in SIP → Message Header → From → SIP
Display info.
From-Header User Name - It locates at SIP -> Message Header -> From -> SIP from address before
[@].
Put Caller ID In URI: This feature is to put Caller ID in URL. The Caller ID is located in SIP → Message
Header → After [From:], Before [<sip:] by default settings. It will be located in SIP → Message Header →
After [<sip:], Before [@]if ticked.
INVITE With Remote-Party-ID Header: Check the box to comprise the information of Remote-Party-ID in
the message header of INVITE. Different format of INVITE header might cause the call not to be connected.
Please consult with your VoIP Service Provider before enabling it.
Callee Quick Media: DVG-N5402SP will send RTP to remote party immediately as user answer an
inbound call.
FXS Hunting For Unknown Number: Select the response for an incoming call which the called number is
not exist in on the DVG.
Disable – DVG responses 404 not fornd.
Hunt and Transit Dial – DVG sends alert to an available FXS port and dial the number to PBX as the
FXS port picked up by PBX. It works with SoftSwitch or IPPBX to allow a remote client reach the PBX
extension for one step dial. (For virtual extension)
FXS Group Hunting/ Ring Type -- DVG sends alert to an available FXS port for hunting group.
Support URI Percent-Encoding(RFC 3986): Check the box to encode/decode the letters of the basic
Latin alphabet, digits, and a few special characters which follow RFC 3986.
Call Hold Compatible With RFC 2543: It is used to set the procedure of Call Hold being compatible with
RFC 2543.
D-Link Systems, Inc.
ADVANCED
72

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents