D-Link DVG-N5402SP User Manual page 65

DVG-N5402SP User's Manual
ADVANCED → VoIP → Line
Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to
avoid unnecessary waiting when an incoming call is diverting to the line.
Flash Time: Enter the time for PSTN to detect if the voltage keeps the on-hook status.
PSTN Ring OFF Length: Enter the ring length detected if the remote party is on-hook from PSTN by PSTN
port. If the ring length form PSTN is longer than this setting, the PSTN will be on-hook, and it will stop the
ringing from FXS.
CO Line Type: Select PSTN (48V) or PABX (24V) for the CO line type connected to PSTN port.
ADVANCED → VoIP → Line
D-Link Systems, Inc.
ADVANCED
65