Rear Panel - D-Link DVG-N5402SP User Manual

DVG-N5402SP User's Manual

Rear Panel

1.
Line: Connect to your original telephone line on the wall jack with RJ-11 cable.
2.
Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11).
3.
USB: Connect to a 3G USB dungle or a printer.
4.
LAN: Connect to your Ethernet enabled computers using Ethernet cabling.
5.
WAN: Connect to your broadband modem using an Ethernet cable.
6.
Ground: A conducting connection with the earth. Connect with the ground so as to make the earth a part of
an electrical circuit using metal wire.
7.
Power Receptor: Receptor for the provided power adapter.
8.
Power Switch: Press down to turn-on DVG-N5402SP.
WARNING: DO NOT
phone port directly to a PSTN line (FXS to PSTN) or to an internal PBX line (FXS to PBX extension).
(3) Stacking is forbidden. Doing so may damage your VoIP Router.
D-Link Systems, Inc.
(1) connect the phone ports to each other (FXS to FXS) or (2) connect any
Telephone Interface Description
6