Manual Equalizer Control - Kenwood KDC-X997 Instructions Manual

KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U

5-2. Manual equalizer control

5-2. Manual equalizer control
You can adjust the equalizer curve manually.
1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.
Refer to <Source
2. Press [Control] knob.
Enters the Function setting mode.
3. Select "Audio Control"
For how to use [Control] knob, refer to
4. Select a equalizer control item using [Control] knob.
Display
"Gain"
"Q Factor"[1]
"Bass EXT"
(Colored text: Factory setting)
[1] Function of KDC-X997.
When "Bass EXT" and "Q Factor" are selected, skip step 5.
5. Select a Band using [Control] knob.
KDC-X997
"BAND1"; 62.5 Hz, "BAND2"; 100 Hz,
"BAND3"; 160 Hz, "BAND4"; 250 Hz,
"BAND5"; 400 Hz, "BAND6"; 630 Hz,
"BAND7"; 1 kHz, "BAND8"; 1.6 kHz,
"BAND9"; 2.5 kHz, "BAND10"; 4 kHz,
"BAND11"; 6.3 kHz, "BAND12"; 10 kHz,
"BAND13"; 16 kHz
KDC-BT955HD
"BAND1"; 62.5 Hz, "BAND2"; 160 Hz,
"BAND3"; 400 Hz, "BAND4"; 1 kHz,
"BAND5"; 2.5 kHz, "BAND6"; 6.3 kHz,
"BAND7"; 16 kHz
6. Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
When the "Manual Equalizer" item is not displayed
This function is not available when "iPod" is selected for "Preset Equalizer".
selection>.
> "Manual Equalizer" using [Control] knob.
<3-3. How to select the
Description
Adjust the gain of each band.
Adjust Q of each band.
–
5. DSP settings (KDC-X997, KDC-BT955HD)
item>.
Range
-9 – 0 – +9 dB
1.35/ 1.50/ 2.00
"OFF"/ "ON"