Figure 2-9 Switch Fabric Interconnections - Cisco ASR 9001-S Overview And Reference Manual

Chapter 2 Functional Description
In systems with the RSP card, the switch fabric is capable of delivering 80-Gbps per line card slot. In
systems with the RSP-440 card, the switch fabric is capable of delivering 200-Gbps per line card slot.
The switch fabric is 1+1 redundant, with one copy of the fabric on each redundant RSP card. Each RSP
card carries enough switching capacity to meet the router throughput specifications, allowing for full
redundancy.
In the Cisco ASR 9922 Router and Cisco ASR 9912 Router, the switch fabric element has been moved
to dedicated FC cards that connect to the backplanes alongside the RP cards. The switch fabric is capable
of delivering 550-Gbps per line card slot.
When five FC cards are installed in the chassis, the switch fabric is 4+1 redundant. When all seven FC
cards are installed in the chassis, the switch fabric is 6+1 redundant. The switch fabric is fully redundant,
with one copy of the fabric on each FC, and each FC carries enough switching capacity to meet the
chassis throughput specifications.
Figure 2-9
Figure 2-9 Switch Fabric Interconnections
Local fabric interface
chip connects route
processor to fabric
RP
FIC
RSP 0
RSP 1
FIC
RP
OL-17501-09
shows the switch fabric interconnections.
Each path is
nominally 20 Gbps,
double line is 40 Gbps
Fabric
Chip
Fabric
Chip
Fabric
Chip
Fabric
Chip
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
Line cards connect to two
primary and two redundant
paths, for 80 Gbps total bandwidth
(when using 80G line rate cards)
Line Card
FIC
(LC 0)
ASR 9006
Series Router
Line Card
FIC
(LC 3)
Line Card
FIC
(LC 4)
Line Card
FIC
(LC 7)
Route Processor Card
ASR 9010
Series Router
2-15