Chapter 1
Overview and Physical Description
RP Front Panel and Access Ports
System alarms reside on the RP. Alarms consist of visual indicators with three levels: Critical (red),
Major (red), and Minor (amber). There is a console interface for remote viewing of alarms and fault
information. The RP front panel has the following information and alarm LEDs and connectors:
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 1-25
OL-17501-09
Two BITS RJ-45 Sync timing ports
Two 10 GE SFP/SFP+ ports
IEEE1588 RJ-45 Timestamp port
RS232/422 GPS TOD RJ-45 port for system timing input
10 MHz and 1 PPS clock input SMB ports
Alarm Output DB9 port with three alarm outputs
External USB2, class-A port
Two RJ-45 100/1000 Mbit Ethernet Management ports
RJ-45 Console port
RJ-45 Auxiliary (AUX) port
Alarm Cut Off (ACO) and Lamp Test momentary push buttons
RP Discrete Status LEDs
SSD LED
–
FC Fault LED
–
GPS LED
–
Critical Alarm LED (red)
–
–
Major Alarm LED (red)
–
Minor Alarm LED (amber)
–
Power Fail LED
ACO LED (amber)
–
SYNC LED (green and amber)
–
One 4-character 5x7 LED dot-matrix display
shows the front panel of the RP card.
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
Route Switch Processor and Route Processor Cards
1-27