Bridge Filtering - D-Link DSL-2750U User Manual

DSL-2750U User Manual
Enter the Filter Name and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port. Click
Apply to save the settings.
The ACTIVE OUTGOING IP FILTER shows detailed information about each
created outbound IP filter.
4.3.6.3

Bridge Filtering

In the Filtering Options page, click Bridge Filtering. The page shown in the
following figure appears. This page is used to configure bridge parameters. In this
page, you can change the settings or view some information of the bridge and its
attached ports.
59