Creating Bridge Wan Connection - D-Link DSL-G2452GR User Manual

DSL-G2452GR MU-MIMO Wireless Dual Band VDSL2 Router with
ASDL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port
User Manual

Creating Bridge WAN Connection

On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 87. The page for creating a new Bridge connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the WAN
value or the value corresponding to the LAN port specified as the
WAN port.
In order to create a VDSL WAN connection, select the PTM value.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 112 of 262
Configuring via Web-based Interface
Description