Network Tools - D-Link DSL-2750U User Manual

message header. The default query response interval is 10 seconds and
must be less than the query interval
Last Member Query Interval (1/10s): The last member query interval is the

amount of time in seconds that the IGMP router waits to receive a response
to a Group-Specific Query message. The last member query interval is also
the amount of time in seconds between successive Group-Specific Query
messages.
Robustness Value: The robustness variable is a way of indicating how

susceptible the subnet is to lost packets. IGMP can recover from robustness
variable minus 1 lost IGMP packets.
Maximum Multicast Groups: Max multicast groups

Maximum Multicast Data Sources (for IGMPv3): max group data sources

that want to receive.
Maximum Multicast Group Members: Max member in one group

Fast Leave Enable: Enable or disable fast leave feature.

LAN to LAN (Intra LAN) Multicast Enable: Enable or disable LAN to LAN

multicast.

4.3.11 Network Tools

Choose ADVANCED > Network Tools. The page shown in the following figure
appears.
DSL-2750U User Manual
67