Fujitsu Siemens Computers PRIMERGY Econel 200 Operating Manual page 36

Operating and Indicator Elements
Operating elements
ON/OFF button
When the system is switched OFF, it can be switched ON by
pressing the ON/OFF button. When the system is operating,
pressing the ON/OFF button will switch OFF the system (standby).
For more information see "Other ON/OFF possibilities" on page 33.
I
Indicators on the front panel
Power-on/standby indicator (green/orange)
Lights green when the server is switched ON and ready for
operation.
Flashes green when the server is switched ON and in "sleeping
mode".
Lights orange when the server is connected to the mains voltage,
but it is switched OFF (standby mode).
Hard disk drive active indicator (green)
An internal hard disk drive (HDD) is being accessed.
Indicators on the accessible drives
CD/DVD drive access indicator
Lights green when the storage medium is being accessed.
Floppy disk drive access indicator
Lights green when the storage medium is being accessed.
30
The ON/OFF button does not disconnect the server from the
mains voltage. To completely disconnect it from the mains
voltage, you must switch OFF the main switch (if available on
the rear ; see figure 4 on page 31) and remove the power
plug from the socket.
Preparation for use and operation
A26361-K970-Z102-2-7619