Removing A Memory Upgrade Module; Checking The Memory Capacity - Fujitsu LIFEBOOK T902 User Manual

Removing a Memory Upgrade Module

Perform steps 1 through 4 of Installing a
1
Memory Upgrade Module.
Pull the clips sideways away from each side of
2
the memory upgrade module at the same
time.
While holding the clips out, remove the module
3
by lifting it up and pulling it away from your
Tablet PC.
Store the memory upgrade module in a static
4
guarded sleeve.
Replace the cover and reinstall the screws.
5

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] -> Settings -> Control Panel, then clicking the System icon. Check the
amount of memory next to "Installed memory (RAM):".
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED
Figure 38. Removing a Memory Module
,
CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED
,
SEE
77 - Memory Upgrade Module
.
T 83
ROUBLESHOOTING ON PAGE
. (I
F THE MODULE IS