Removing A Memory Upgrade Module - Fujitsu LifeBook T732 User Manual

Tablet pc
Hide thumbs Also See for LifeBook T732:
Table of Contents

Advertisement

Available languages

Available languages

Figure 41. Opening Memory Compartment
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into
7
the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
Replace the cover and reinstall the screws.
8
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR
PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY

Removing a Memory Upgrade Module

Perform steps 1 through 4 of Installing a Memory Upgrade Module.
1
Pull the clips sideways away from each side of the memory upgrade module at the same time.
2
While holding the clips out, remove the module by lifting it up and pulling it away from your Tablet PC.
3
1
2
2
Retaining Clip
Figure 42. Installing a Second Memory Module
.
79 - Memory Upgrade Module
2
1
Alignment Key
T
PC. O
ABLET
NCE IT IS INSTALLED
,
YOU CAN LEAVE IT IN

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents