Setting Up A Static Ip Address Using The Front Panel; Table 3-2 Setting Up A Static Address - Honeywell UDA2182 User Manual

UDA Communications Setup

3.1.2 Setting up a Static IP Address using the Front Panel

Be sure you have an IP address that allows it to be accessible on the intended Ethernet network. Consult
your IT department or network administrator for allocating IP addresses to the UDAs as required.
You will need to set each UDA's IP address prior to network connection since every UDA is shipped with
the default IP address of 192.168.1.254. Placing multiple UDAs on the same network before they have
been given unique IP addresses will cause problems.
Step
1 On the front panel, select the Communication menu option in the Setup menu.
Inputs Inputs
Outputs Outputs Outputs Outputs Outputs Outputs
Relays Relays Relays Relays Relays Relays Relays Relays
Alarms Alarms Alarms Alarms Alarms Alarms Alarms Alarms
Monitors Monitors Monitors Monitors Monitors Monitors Monitors Monitors
Math Math Math Math Math Math Math Math
Logic Logic Logic Logic Logic Logic Logic Logic
Auxiliary Auxiliary Auxiliary Auxiliary Auxiliary Auxiliary Auxiliary Auxiliary
PID Control PID Control* PID Control PID Control PID Control* PID Control PID Control* PID Control*
Auto Cycling Auto Cycling* Auto Cycling Auto Cycling* Auto Cycling* Auto Cycling* Auto Cycling Auto Cycling
Variables Variables
Communication Communication Communication Communication Communication Communication
Maintenance Maintenance Maintenance Maintenance Maintenance Maintenance
2 In the Communication menu, select Ethernet.
COMMUNICATION COMMUNICATION
IR FrontPanel IR FrontPanel
Modbus Modbus
RS485 RS485
Ethernet Ethernet
You will see the following Parameters:
Port Reset
DHCP (Dynamic Host Configuration Protocol)
IP Addr Octet 1-4 (IP Address)
SbntMsk Octet 1-4 (Subnet Mask)
Dflt Gtwy Octet 1-4 (Default Gateway)
DNS Srvr Octet 1-4 (Domain Name Service)
3
Set DHCP to No.
4 Set the IP Addr octets 1 through 4 to the IP address where octet 1 is the left-most IP
address octet and octet 4 is the right-most IP address octet. For example, for the default
address of 192.168.1.254, octet 1 equals 192, octet 2 equals 168, octet 3 equals 1, and
octet 4 equals 254.
5 Set the subnet mask octets 1 through 4.
6
Set the Default gateway octets 1 through 4.
7 If you are not using a DNS server to identify your email server's address, you can leave the
6

Table 3-2 Setting Up a Static Address

Setup Setup Setup Setup Setup Setup Setup Setup
UDA2182 Communications User Guide
Action
January 09