Internal Hard Drive; Removing A 3 1/2-Inch Internal Hard Drive; Securing The Zip Drive; Locating The Internal Drive Bracket - NEC POWERMATE CT 815 Service And Reference Manual

Internal Hard Drive

The following sections describe how to remove or install a 3 1/2-inch hard drive in the internal
drive bracket.

Removing a 3 1/2-Inch Internal Hard Drive

Remove a 3 1/2-inch internal hard drive from the internal drive bracket as follows.
Remove the system unit cover and front panel (see "Removing the Cover" and "Removing
1.
the Front Panel").
system power cable. Power is removed only when the power cable is unplugged.
Tag and unplug the signal and power cables from any drives in the internal drive bracket.
2.
Locate the internal drive bracket in the system chassis (see the following figure).
3.
A – Internal Drive Bracket
B – Front of Chassis
3-24 Disassembly and Reassembly

Securing the Zip Drive

A – Zip Drive
Before removing the cover, turn off system power and unplug the

Locating the Internal Drive Bracket

C – Accessible Device Cage
B – Screws