Table of Contents
Advertisement
Install a replacement heat sink and fan as follows and in accordance with any procedures
5.
included in the heat sink kit.
If the kit includes a thermal pad or thermal grease, center the pad or grease on top of
!
the processor.
Align the heat sink and fan assembly with the processor and set it down on the
!
processor (see the previous figure for alignment).
Attach the heat sink retention clip by hooking the non-flange end of the clip over the
!
socket tab.
Press the opposite end of the clip over the tab on the socket until it snaps in place.
!
Plug the cooling fan cable into its connector (CPU Fan) on the system board.
6.
Replace the cover.
7.
Connect any peripherals and power cords, and power up the system.
8.
Disassembly and Reassembly 3-15
Advertisement
Table of Contents
