Mirror Image - Husqvarna Viking Freesia 415 User Manual

Mirror images - Model 415
Mirror image side to side
You can change the straight stitch
needle position from left to right by
mirror imaging the width.
When mirror image side to side is
selected the symbol
on the Infodisplay.
Darning and taper satin stitches
The darning and taper satin stitches
have their own stitch memories
where the number of stitches, length
or width changes are stored.
1. Sew until the stitch has reached
the desired length.
2. Touch the button. The ma-
chine now completes the stitch.
3. When you have the result you
wish, touch STOP.
4. The stitch will now repeat in
succession and the machine will
stop automatically when the stitch
is completed
If you wish to sew another stitch
and then return to your stitch, you
only select this stitch and touch
STOP.
The repeated stitch will not be
retained if you switch off the
machine.
If you attempt to program these
stitches in the PROG position
(Model 425), the stitch number is
flashing to indicate that this is not
possible.
Instruction book Freesia 415, 425
.
will be shown
Model 425
Stitches 28-29
Model 415
Stitch 15
23