Presser Foot Pressure; Presser Foot Lever, Changing; The Presser Foot - Husqvarna Viking Freesia 415 User Manual

Presser foot pressure

The presser foot pressure is adjusted
with the dial on the front of the
machine. Normal setting is 4. The
higher the number the more
pressure on the fabric. Knit and Soft
fabrics should be sewn at a lower
pressure setting (2).
Presser foot lever
The presser foot is raised and
lowered with the presser foot lever.
The presser foot must be lowered
when sewing.
For thick fabrics, lift the presser foot
lever as far as it goes and hold it
there.The lift of the presser foot is
increased by several millimeters.
Changing the presser
foot
1. Make sure that the needle is in
the highest position. Pull the
presser foot down and towards
you.
2. Line up the cross pin on the foot
between the spring and the
presser foot ankle. Press back
until the foot snaps into place.
14
Instruction book Freesia 415, 425