Husqvarna Viking Freesia 415 User Manual page 22

Corrections
If you wish to change a stitch in
your program:
1. Touch FUNC to PROG.
2. Use the buttons marked with
arrows or
number is displayed.
3. Select the new stitch.
CLR - Deleting stitches
If you wish to delete a certain stitch
within the program:
1. In the PROG position, use one of
the buttons
actual stitch number is displayed.
2. Touch CLR. Now the stitch and
everything to the right of it will
be deleted.
3. If you wish to delete the whole
program, touch the FUNC button
to return to PROG. The machine
will be positioned at the first
programmed stitch.
4. Touch CLR. CLR deletes the
program of stitches.
If you touch CLR by mistake, simply
touch CLR again to bring back the
balance of your program as long as
you have not used another button.
When the program memory is empty
the stitch length and width is shown
as 0.0/0.0 on the display.
Mirror images - Model 425
Mirror image side to side
In NORM and PROG only the stitch
selected is mirrored. In REP the entire
program is mirrored. You can also
change the straight stitch needle
position from left to right by mirror
imaging the width.
When mirror image side to side is
selected, the symbol
on the Infodisplay.
22
until the stitch
until the
.
will be shown
Instruction book Freesia 415, 425