Husqvarna Viking Freesia 415 User Manual page 17

Functions / Infodisplay - Model 425
Stitch selection buttons
You select a stitch from the
panel by pressing the stitch
selection buttons. With left
button you get tens and with
right button you get 1-9. The num-
ber of the selected stitch is displayed
to the right of the Infodisplay.
FIX
By using the FIX button you
can tie off a stitch at the
beginning and/or at the end.
The symbol
display indicates that FIX is
selected.
CLR - Deleting stitches
This button is used while in
PROG if you wish to delete
what you have programmed.
See page 22.
FUNC - Selected function
When you turn on the machine,
the selected function displays
NORM. Touch the FUNC button to
PROG for programming. If you
touch the button again, REP =
repeat will be displayed to sew your
programmed stitches.
Instruction book Freesia 415, 425
flashing on the
After a third touch, NORM is dis-
played again.
Memory - position
These buttons are used to
advance or return within a
memory, when entering or checking
stitches. See page 20. Model 425 has
one memory, holding up to 30
stitches.
Recommended presser foot
The letter shows which
presser foot is correct for
the stitch you have
selected. The corresponding letter is
on the presser foot.
Recommended thread tension
The numbers above the
symbol show the
recommended setting of the
thread tension for the stitch you
have selected.
Buttonhole sensor foot
Model 425 has a socket for the
buttonhole sensor foot, which is
available as an optional accessory.
See the Accessory User's Guide.
17