Redundant System Fan Module; Figure 17. Fan Module Assembly; Table 15. Nonredundant Fan Header Assignment; Table 16 Redundant Cooling Zones - Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory Manual
Server chassis/server system
Hide thumbs
Also See for SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory:
- Manual (104 pages) ,
- Spares/parts list and configuration manual (27 pages) ,
- Hardware installation manual (16 pages)
Table of Contents
Advertisement
Intel® Server System SR2500AL
Fan #1 - CPU1 cooling
Fan #2 - CPU2 cooling
Fan #3 - PCI Cooling
3.2
Redundant System Fan Module
Fan
System Fan #1 & #2
System Fan #2 & #3
System Fan #5 & #6
Power Supply Fans 2
fans per module
Each 10-pin fan connector provides power and ground, PWM control, tachometer output, a fan
present detection signal, and a fault LED signal allowing it to be monitored independently by
server management software. The following table provides the pin-out and description for the
connectors on each fan.
Revision – 1.6
Table 15. Nonredundant Fan Header Assignment
Fan ID
Figure 17. Fan Module Assembly
Table 16 Redundant Cooling Zones
Cooling
Description of greatest cooling influence
Zone
CPU1
Primary cooling for CPU1 and memory
CPU2
Primary cooling for hard drives 4 and 5, CPU2,
the BNB, and the low profile PCI cards
PCI
Primary cooling for hard drives 2 and 3, Full
Height PCI cards, PXH and IOP80333 chipset
Power
Primary cooling for hard drives 0 and 1, and the
Supply
power supply module(s)
Intel order number D31980-009
Mid-plane Fan Header Name
FAN_2
FAN_4
FAN_5
TP02102
2BCooling Sub-System
23
Advertisement
Table of Contents
