Basic Operation; Switching On/Off The Unit; Faceplate Release; Sound Adjustment - Pyle PLMR17BTS Owner's Manual

OPERATION

BASIC OPERATION

SWITCHING ON/OFF THE UNIT

Press button (6) to turn on the unit.
When the unit is on, press and hold
button (6) to turn the unit off.

FACEPLATE RELEASE

Press button (2) to
removable faceplate.

SOUND ADJUSTMENT

Rotate the SEL button (4) to adjust the
volume. up or down step by step.
Shortly press MUTE button (6) will mute the
sound, press it again will resume the
sound.

LOUDNESS

Press LOUD button (3) for several seconds
to switch loudness function on, and "LOUD"
will appear on the LCD for several seconds.
Press it for several seconds again to
release this function.

DISPLAY

Press DSP button (18) to change display all
the unit setting and music information.

RESET FUNCTION

RESET button (25) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (25), the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.

MODE SELECTION

Shortly press MODE button (1) to change
the unit working mode: Radio, USB, CARD,
IPOD (optional), AUX and BT Audio.

SYSTEM SETTING

Long press the SEL button (4) on the front
panel to enter SYSTEM SETTING mode.
There are below items to adjust.
detach the
P-VOL
ON_OFF
_USA_EUR _ORT_BRZ
Use SEL button (4) to select the item you
want to change, and use SEL button (4) to
change the corresponding setting.
1) BEEP ON/OFF:
When the BEEP ON or BEEP OFF is
displayed on the LCD, rotate the SEL
button (22) to switch on/off the BEEP
sound
2) P-VOL
P-VOL: The max volume value when you
turn on the unit. Such as when you set
the P-VOL to 40. If the volume value is
small than 40 when you turn off the unit.
Next time you turn on the unit. The
volume will keep the last volume value.
But if the volume value is large than 40
when you turn off the unit. Then next time
you turn on the unit. The volume value
will back to 40.
3) Radio area setting:
Four areas are
Europe,USA, Orition,Brasil. Rotate the
SEL button (22) to set the radio area you
wanted.
AUDIO ADVANCED SETTINGS
Short press the SEL button (4) on the front
panel to enter advanced audio SETTING
mode: BESS-TREB-BAL L-R, FAD L-R.
Rotate the SEL button (4), you can change
the Left and right balance and Fader.
Equalization setting
Long press EQ button (21) to turn on
9
/ADJ/ BEEP
ON/ STEREO_MONO/AREA
inside , that are
ON_OFF/LOC