Philips HD7812 Insrtuctions page 9

A
B
4222.001.9880.7.indd 9
6 Close the lid and lock the lever.
Note: Make sure you lock the lever properly. Push it down until it snaps home
with a click.
Note: Never flush the machine with the lid open. The lid must be properly
locked.
7 Put the plug in an earthed wall socket.
8 Put a bowl (with a capacity of at least 1500ml) under the coffee
spout to collect the water.
9 Press the on/off button I and subsequently press the 1-cup button
° and the 2-cup button °° briefly at the same time.
The boiler fills itself with water from the water reservoir. This takes
,
some time (approx. 90 to 150 seconds). The machine switches off
automatically when the flushing cycle ends. During the flushing cycle,
the machine produces more noise than during a regular brewing
cycle.
Note: Before you use the machine for the first time, clean the coffee spout
and the pod holders with hot water and some washing-up liquid or in the
dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with
some washing-up liquid.
Now your Philips SENSEO
Brewing coffee
1 Fill the water reservoir with cold water up to the MaX indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
- ° MIN: minimum amount of water required to brew 1 cup of
SENSEO coffee.
®
- °° MIN: minimum amount of water required to brew 2 cups of
SENSEO coffee.
®
- A full reservoir allows you to make SENSEO
times (up to 5 cups (HD7810, HD7812) or up to 10 cups (HD7811).
This makes it unnecessary to fill the water reservoir each time you
want to make a cup of coffee.
coffee machine is ready for use.
®
coffee a number of
®
EnglisH
9
29-07-09 21:00