Placing Originals; Using The Document Feeder - imagistics DL260 Operating Manual

5. Placing Originals

Using the Document Feeder

The Document Feeder automatically feeds original sheets placed on the Document Feed Tray one by one.
After the copy cycle has been completed, it automatically ejects the original onto the Document Exit
Tray. To ensure the best performance and effective use of the Document Feeder, use the appropriate type
of originals as shown below. Some originals may not be suitable for reliable operation of the Document
Feeder. Here is a guide.
Originals Suitable for the Document Feeder
<Duplexing Document Feeder>
Type of Originals : Plain paper
• 1-Sided Original : weighing 13-1/4 to 29-1/4 lbs.
• 2-Sided Original : weighing 16 to 24 lbs.
• Mixed Original Detection mode : weighing 16 to 24 lbs.
Original Size : 1-Sided Original, 2-Sided Original Mode :11" 17"L to 5-1/2" 8-1/2"L
Mixed Original Detection Mode
<Automatic Document Feeder>
Type of Originals : Plain Paper
• Single Feeding
• Multiple Feeding : weighing (14 to 21-3/4 lbs.)
Original Size : 1-Sided Original, 2-Sided Original Mode :11" 17"L to 5-1/2" 8-1/2"L
Mixed Original Detection Mode
Originals Not Suitable
• Typing paper, paraffin paper, and other thin paper
• Thick paper
• Originals greater than 11" 17"L or smaller than 5-1/2" 8-1/2"
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
Typing paper, Typing paper,
paraffin paper, paraffin paper,
and other thin and other thin
paper paper
* For any of these types of originals, raise the Document Feeder and place the original manually on the
glass to make a copy.
: weighing (10-3/4 to 21-3/4 lbs.)
Thick paper Thick paper
p. 2-22
: 11" 17"L to Letter
: 11" 17"L to 5-1/2" 8-1/2"L
Continuous
forms
Wrinkled or
dog-eared
original
2-19
Stapled
originals
1134O073AA