When The Message "Stapler Empty." Appears; Reloading The Staple Cartridge - imagistics DL260 Operating Manual

5-14

4. When the Message "Stapler Empty." Appears

Reloading the Staple Cartridge

Slide the Finisher/Mailbin Finisher away
1
from the copier.
2 Press and turn the knob and open the cover at
the rear of the Finisher.
Pull the Stapler Unit out of the well.
3
The message shown on the left appears when the
staples are running out. Reload the Staple
Cartridge with a new clip by following the
procedure given below.
1170P165EC
While pressing down the green lever, pull out
4
the Staple Cartridge.
1166O165AA
Remove the empty staple clip from the
5
Staple Cartridge.
1166O126AB
Load a new staple clip into the Staple
6
Cartridge and carefully peel off the Seal.
1166O127AA
1166O128AA
1166O129AA
1166O161AD