Hard Disk - Canon Color imageRUNNER LBP5975 Getting Started Manual

NOTE
Be sure to use a 3.3V DDRAM DIMM compatible with this printer as the
expansion RAM module. It is recommended that you should use Canon
Expansion RAM ER-128A, ER-256A, or ER-512A as the expansion RAM.
DDRAM DIMM (3.3V) compatible with this printer
PS ROM
By installing PS ROM, "PostScript 3 Emulation" which makes it possible to
print with PostScript is available.
Also, by installing a hard disk and expansion RAM module (256 MB or more),
you can print PDF files using the direct print function.
PS ROM A-98C
IMPORTANT
Be sure to use PS ROM A-98C compatible with this printer.
PS/Barcode ROM
By installing PS/Barcode ROM, the following bar code fonts are also available
as well as the functions of PS ROM.
- OCR-B
Step
- Symb. FontInform
8
- Symbole stethos
- BarDIMM ©1997
- USPS ZEBRA+4Stat
50
Usable
Notch
PS/Barcode ROM A-98B
IMPORTANT
Be sure to use PS/Barcode ROM A-98B compatible with this printer.

Hard Disk

You can use a hard disk that can be built in the printer to save the received
print jobs temporarily. By installing the hard disk, you can use various
functions such as print job spooling, e-mail print, encrypted secured print,
secured print, electronic sort, and RIP Once.
Hard Disk Kit HD-98B
IMPORTANT
When you are using a hard disk, set MODE TIMEOUT in the SETUP menu
to a setting other than OFF. It is recommended that you should specify the
default setting, "15 seconds".