Installation Space
Select an installation location where you can secure the following amounts of
free space around the printer, and a surface that can support the weight of the
printer. The dimensions of the space required around the components and the
positions of the feet are as follows.
For details on the installation space of the printer with the optional paper feeder
installed, see "Installing a Paper Feeder," on p. 51.
Required Peripheral Space (LBP5975)
Front Surface
29.13 (740)
Paper
cassette
60.81 (1544.5)
Required Peripheral Space (LBP5970)
Front Surface
29.13 (740)
Paper
cassette
60.08 (1526)
(in. (mm))
(in. (mm))
Top cover
Front cover
5.32
(135)
(in. (mm))
(in. (mm))
Top cover
Front cover
5.32
(135)
Foot Positions
Front Surface
The rubber feet are 6 mm high, and dimensions of the top surface are 0.59 in. (15 mm) x 0.91 in.
(23 mm) for the front feet, and 0.94 in. (24 mm) x 0.39 in. (10 mm) for the rear feet.
Precautions for Handling
CAUTION
If an error should occurred to the hard disk in the printer unit, the
received, recorded, and saved data may be deleted. It is
recommended not to record or save important data on the hard disk.
Canon assumes no responsibility whatsoever for any damages or
losses arising from data loss by the customers.
(in. (mm))
2.48
17.43
3.99
(63)
(442.7)
(101.3)
2.48
17.43
3.99
(63)
(442.7)
(101.3)
7