Sanyo CE27LD4-B Instruction Manual page 6

Step : 3 Switching on / Plug & Play
The LCD TV will have a red Standby light to
show there is power.
Press the standby button to start Plug and
Play.
The self-automatic tuning system called Plug and Play will start. The
TV scans the analogue channels first and then switches to digital
channel mode and scans digital channels. This could take up to 15
minutes. During automatic tuning, the TV displays the tuning status of
analogue and digital channel tuning on the screen.
Thank you for purchasing your SANYO TV.
Now I am searching and storing all programmes.
Please wait.
Scan for channels
Channels found
55
OK
Done Save
Press OK(on remote control only) to save.
All channels
1 BBC ONE
2 BBC TWO
3 ITV 1
4 Channel 4
5 five
6 ITV 2
7 BBC THREE
8 Teletext
9 BBC FOUR
10 Sky Travel
11 UK History
12 Ch 14
13 CH 15
14 QVC
15 TV Travel Shop
OK
Watch TV
Press OK(on remote control only) to Watch TV.
Now the installation is complete!
After Plug & Play, Digital channels are stored in the programme
positions shown in the All channel table.
Analogue channels will be automatically sorted as follows:
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4 or S4C
Programme position 5 : CH5
Programme position 6 : ITV2
Programme position 7 : channels in order found.
If any other channels are available in your reception area, the
remaining channels will be stored from programme position 7 in
sequence as found.
If you move to another city or cable is installed, please follow the
description "Channel List - scan for channels". (on page 11) or
"Preset Menu" (on page 16) for Analogue channels.
This procedure only appears the first time you switch on.
6
INST ALLA
INST ALLA
P
Analogue Set-up completed
Next digital Set-up is starting
Scan for channels
Channels found
0
The scan will take approximately 3 minutes
In progress RET Stop
RET Cancel
TION
TION
Terminals
1. Front of LCD TV
Standby switch
-
+
P
Press the 5 or 6 button to increase or decrease the programme
position.
Press the 1 or 2 button to increase or decrease the sound
volume.
3. Left side terminals
To select the AV4 mode press the v button repeatedly.
When the headphones are inserted the sound from the TV
speakers is muted.
3.5 mm Mini Headphone din
AV4 Video in
AV4 Left Audio in
L/S
AV4 Right Audio in
R/D
Standby Power indicator.