Sanyo CE27LD4-B Instruction Manual page 14

Screen mode selector
To select the screen mode, Auto, Natural,
Zoom14:9, Title In 14:9, Zoom 16:9,
Title In 16:9, Full or Normal.
Digital Shot button
Press to capture up to 12 pictures and view
using CS button.
TV/AV switch
To switch from TV, AV1, AV2, AV3 or
AV4 mode press repeatedly.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons in analogue
and digital. For selection of analogue
programme position 10 - 99, for example 23,
first press -/-- button and press
2 and 3 numeric buttons.
MENU
To switch on the screen display menu on/off.
Also see page 12.
Cursors
To select the sub menu items in the
menu display.
OK
To save the setting in the menu.
(also refer to CS button).
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
Bass selection
To get an emphasised bass sound ON or OFF.
VCR / DVD controls
With selected Sanyo DVD/VCR players you can use this remote. The
following table shows all available function buttons for the VCR and
DVD. When you use a compatible Sanyo DVD player, first press and
hold the DVD button and then press your desired function button.
VCR
Power
Play
Pause
Stop
Fast/Cue
Rewind/Review
Record, press both buttons at the same time.
DVD n/a
n/a
OK
n/a
14
REMOTE CONTROL
REMOTE CONTROL
DS
DVD ( )
blue symbols
Power
Play
Pause
Stop
Next chapter selection
Previous chapter selection
DVD command mode selection
Enter
Cursor selection
- Analogue
- Analogue
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Half volume -> Mute
Standby / Power on/off
To switch the TV on and off.
Also see page 16.
D/A selector
To switch between analogue and digital channels.
VCR / DVD controls
Please refer to the table below.
System selector
To select the colour system in the AV mode,
AUTO, PAL or NTSC.
Programme up and down
To select the next programme number or
previous programme number.
CS button
Press button to display digital shot pictures and to
enter and exit the Album.
Volume up/down
To adjust the sound level.
Picture mode selector
To access a series of picture modes:
PERSONAL, STANDARD, ECO and DYNAMIC.
Nicam / Bilingual selector
To switch the sound mode as follows; NICAM or MONO
in the stereo programmes. A or B in the bilingual
programmes. If the nicam or stereo sound reception is
poor in quality, you can switch to MONO sound reception
by pressing A•B button. This operates only analogue
channel mode.
Teletext / TV selector
To switch TV, MIX and Teletext mode.