Sanyo CE27LD4-B Instruction Manual page 10

Parental lock
How to watch a locked channel.
1. Select a locked channel, Parental lock display appears.
Parental lock
!
1 BBC ONE
2. Press the OK button, enter the Parental code and press the OK
button again.
?
Enter parental code
OK Save
3. The channel is temporarily unlocked until the channel is changed.
4. Press the MENU button to return to normal TV picture.
If Parental lock is activated and you wish to record this locked
channel, deactivate first before setting timer recording.
To deactivate parental lock.
1. Press the MENU button to select Main menu.
2. Enter the Parental code.
3. Press the OK button to enter menu functions.
4. Use the e or d button to select Parental unlock, press the 8
button to enter.
5. Press the Red button to deactivate.
!
Deactivate parental lock
OK Select
6. Press the MENU button to exit.
Main menu screen will show either Parental Lock or Parental
Unlock ( if it is use).
Once you have activated Parental Lock each time you need to
enter the Main Menu you will need the code.
Configuration
Preferred language.
1. Press the MENU button to select Main Menu.
2. Select Configuration by using the e or d button. Press the 8
button to enter.
3. Press the d button to highlight Preferred language and press
the 8 button to enter.
Configuration
Prefered language
Change parental code
Common Interface
Audio - Select your preferences as required.
Example. If you speak Welsh (Gaelic) and prefer to receive Welsh
(Gaelic) audio when it is transmitted then select Welsh (Gaelic) for
your first Language and English as your second.
4. Press the 7 or 8 button to select Language, press the e or d
button select second language and change your preference using
the 7 or 8 button.
10
DIGIT
DIGIT
All Channels
RET Cancel
RET Cancel
AL OPERA TION
AL OPERA TION
Subtitling - Select your preferences as required.
If you wish for Welsh or Gaelic Subtitles instead of English to be
shown (when available) then select your preference for the first
language.
Example: as shown will give you English first language, if not
available Welsh may be shown.
5. To change press the e or d button to highlight the box and
press the 7 or 8 button to select your preferred First language
and repeat for Second language.
6. Press the d button to select Subtitle display. This can be set ON
or OFF by pressing the 7 or 8 button.
7. Press the OK button to Save.
This takes you back to Configuration menu screen.
Change Parental Code - See page 9 under Parental lock.
Press MENU to return to normal TV Picture.
Common Interface
This TV set provides a common Interface slot located behind a door
on the rear of the TV set on the left side.
1. Insert the card in the slot located on the top of the TV.
2. Press the MENU to select Main Menu.
3. Select Configuration by using the e or d button. Press the 8
button to enter.
4. Press the d button to highlight Common Interface and press the
8 to enter.
Reader 1: Interface card
OK Select
The following screen appears to show that a card is inserted.
When you select OK, follow the on screen directions. This will vary
depending on the type of card inserted.
Important!
The TV should be turned off by the Mains Power switch when insert-
ing or removing the Common Interface Card, otherwise it may cause
damage to the card or the TV set.
Language choice
Audio:
First language English
Second language
Welsh
Subtitling:
First language English
Second language
Welsh
Subtitle display
On / Off
OK Save RET Cancel
C I
Common Interface
RET Cancel