Vertu CONSTELLATION QUEST RM-582V Reference Manual page 27

Analogue clock showing alarm at 7 o'clock.
Analogue clock showing busy from 3 to 4 o'clock.
To reset an Alarm
1. If you want to reset an alarm, click on the Options and select Reset alarm. Press
Done when you have made your changes.
To remove an alarm
1. Highlight the alarm you want to delete.
2. Select Options > Remove alarm and press Yes when prompted.
Set alarm ring tones
The selected alarm tone applies to all alarms.
1. With the clock function open.
2. Select Options > Settings > Clock alarm tone, and select an alarm from the
displayed list.
3. Press Back to exit the Settings.
World Clock and Dual Time
The Clock allows you to see timings of different locations in the world clock.
To add a specific location to your world clock, select, Clock > World clock >
Options > Add location. It gives you a list of places you can view the time for.
Selecting a particular places adds in the location along with the current time at that
place.
You can change the settings of the clock by Clock > World clock > Options >
Settings. This provides you with various options like setting the time zone, setting the
home location, date and time format, clock type and so on.
The Clock includes a dual time handling system which comes into effect when you
travel away from either:
• Your home country
• Your home location time zone
Your phone handles the location using the Mobile Carrier Code of the current network
to obtain the current time, plus if necessary access to an online service to obtain
greater accuracy.
By default both digital and analogue clocks display the home time in digital format
within the current clock zone. On returning to the home location, the clock will switch
back to the single clock only showing a single current time.
Automatic Time setting
The automatic time feature keeps the phone clock accurate, and means that you do
not need to set the time or date manually at different locations (but the SIM card must
be present in the phone). When enabled, this sets the system clock to the local UTC
value, from which the necessary GMT offsets are applied automatically to present the
correct time and date.
If there is a problem with the automatic time update system, a warning icon
appears in the lower status bar to cover various situations such as:
• The current and home time, and the current location is unknown so the time
cannot be updated.
• On first power-up, when the user agreed to the terms and conditions, the mobile
phone network was out of reach.
• Travelling to a country with multi-time zone and where the geographic location is
unknown.
• Clock is believed to be inaccurate due to length of time since the last successful
synchronisation.
The automatic time setting function can be turned On or Off.
Home Screen and Clock
27