Update Firmware - Pandigital Novel 7 User Manual

UPDATE FIRMWARE

WARNING!
IMPORTANT: This firmware update procedure is only available for Windows PC
users at this time. We recommend Mac users to locate a Windows PC that can be
used for the firmware update at this time. Mac based update procedures will be
available in future.

If the device has a low battery charge, you may not be able to perform a
successful update. It is recommended that you connect the device to the power
adapter before performing the firmware upgrade.
1. Back up all your media files to your computer.
2. On your computer, go to www.pandigital.net/downloads.
3. Choose the
4. When prompted, you can either
Run method may result in a slower process than saving & running the program
directly from your computer).
5. Follow the prompts in the
firmware into your device.
6. After the download is complete, turn your device off.
7. Press the
10 seconds until you see the upgrade text appear on the screen, and then release
both buttons immediately.
8. Your device updates and restarts automatically.
9. Reset the
initial setup instructions beginning on page 12.
10. You must re-download your Kobo eBooks to re-populate
When you download the first eBook, you are prompted for your Kobo and Adobe
login information.
Performing a firmware update resets all settings to factory defaults, and
all your personalized data (email accounts, contacts, etc.) is deleted.
Your Kobo eBooks are deleted, so you must re-download them to
Library
after the update is complete. IMPORTANT: You must use the
same Adobe account that was used to originally download the eBooks.
The local media that you imported from SD card or copied from
computer remains in the device.
Update with Your PC
Upgrader
Volume +
button and then the
Date Time
and and set up your
option.
Save
the program or
window to connect your device and install the
power key
Wi-Fi network
58
Run
it from the website. (The
and hold both approximately
again by following the
My Library
.
My