Using The Rds Functions; What Is Rds; Program Service Name Display - Pioneer FH-P6600R Operation Manual

Using the RDS Functions

What is RDS?

RDS (Radio Data System) is a system for transmitting data along with FM programs. This
data, which is inaudible, provides a variety of features such as: program service name, pro-
gram type display, traffic announcement standby, automatic tuning and program type tun-
ing, intended to aid radio listeners in tuning to a desired station.
Note:
• RDS service may not be provided by all stations.
• RDS functions, like AF (Alternative Frequencies search) and TA (Traffic Announcement standby),
are only active when your radio is tuned to RDS stations.

Program Service Name Display

With this function, the names of networks/stations providing RDS services replace the fre-
quency on the display a few seconds after they are tuned in.
• When you want to know the frequency of the current station, change
the display.
Each press changes the Display ...
Each press of the DISPLAY button selects the display in the following order:
Frequency = Program Service Name = PTY Information
Note:
• After switching displays, if you do not perform an operation within 8 seconds, the Program Service
Name is automatically displayed.
7 PTY Information
PTY (Program Type ID code) information for the currently tuned station appears on the
display for 8 seconds. The information is correlated with the list in the section "PTY List"
on page 30.
Note:
• If a PTY code of zero is received from a station, "None" will be displayed. This indicates that the
station has not defined its program contents.
• If the signal is too weak for this product to pick up the PTY code, "NO PTY" will be displayed.
7 Frequency
The frequency of the current station appears on the display.
23