Lenovo ThinkPad Edge E130 User Manual page 81

7. Place the new hard disk drive or solid-state drive into the hard disk drive or solid-state drive bay.
8. Slide the hard disk drive or solid-state drive firmly into the connector
9. Attach the cover 1
10. Reinstall the battery. See "Replacing the battery" on page 59.
11. Turn the computer over again. Connect the ac power adapter and all cables.
and pivot it downwards 2 . Then tighten the screws
1
, and then reinstall the screws
3 .
.
Chapter 6 Replacing devices
2
.
65